Sunday, December 15, 2013

Finished Up Interior Surface Prep

Today I completed the interior sanding, surface prep, in anticipation of further bulkhead installations as well as furniture.  Over the coarse of the afternoon, I worked my way from the bow to the forward side of the mast bulkheads, sanding the hull, overhead, underneath of side decks, and bilge.  I was just way beyond having the energy to snap some photos of the work, but did have some photos available from day one of interior surface prep - showing the engine room.

Starboard engine room.

All sanding was done on the Porter Cable 7335 5" and 7336 6" random orbital sanders, using 40-grit psa pads.

Cockpit locker shown below, port engine room.

Parting shot of the stern.

Total Time: 5 Hrs.

No comments:

Post a Comment